燃焼合成による微細TiC粒子分散Ti-Al-C三元系複合材の作製と微細組織観察

書誌事項

タイトル別名
  • Production of Titanium-Aluminum-Carbon Ternary Composites with Dispersed Fine TiC Particles by Combustion Synthesis and Their Microstructure Observations
  • ネンショウ ゴウセイ ニ ヨル ビサイ TiC リュウシ ブンサン Ti Al C 3ゲンケイ フクゴウザイ ノ サクセイ ト ビサイ ソシキ カンサツ

この論文をさがす

抄録

Ti-Al-C ternary composites were produced by combustion synthesis using titanium, aluminum and graphite powders. Microstructure observations, X-ray diffraction experiments and micro Vickers hardness test were performed for the obtained porous specimens. With low carbon contents, a few intermetallic compounds of titanium and aluminum were obtained. Ti4Al2C2 and TiC phases were produced as the carbon content increased. It is considered that formation of these phases depends on the quantity of heat generated during combustion synthesis. It was suggested that Ti4Al2C2 phase was formed by direct reaction between TiC and Ti-Al system intermetallic compounds. Ti4Al2C2 phase indicated the same hardness value (about 4.5GPa) as γ-TiAl phase. As the carbon content increased, the hardness value increased remarkably because of dispersion strengthening by TiC particles. The maximum hardness was about 8.6GPa. Microstructure observations for low carbon contents showed that large TiAl3 particles were covered with γ-TiAl particles with a grain size of approximately 1μm. On the other hand, for high carbon contents, it was found that microcomposites which TiC particles with a grain size of approximately 1μm were dispersed homogeneously in the Ti4Al2C2 phase with rod-like structures. This microcomposite will be expected to have more excellent elevated temperature strength than that of TiAl intermetallic compounds.

収録刊行物

被引用文献 (4)*注記

もっと見る

参考文献 (14)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ