書誌事項
- タイトル別名
-
- Development of an Inclined Shaft Reaming Machine for Omarugawa Hydroelectric Power Plant
- オマルガワ スイリョク ハツデン ショヨウ シャコウ リーミング TBM ノ カイハツ
この論文をさがす
抄録
Tunnel boring machine is one of the accepted methods for infrastructural projects for tunnel ventilation or surge shaft in hydroelectric power projects. It is also a widely used technology in the installation of production and ventilation shafts and ore passes for mines. For large diameter inclined shaft boring, there are two solutions: Full-face blind shaft boring machine (FM) and Shaft reaming machine (RM) . In the latter case the excavated muck falls through the pilot hole to a lower level. The pilot hole of a small diameter can be also excavated with a raise-boring machine. Through the careful and comprehensive discussion, a RM was found to be appropriate for our target project (Omarugawa hydroelectric power project) . In the development process, very valuable data taken in former Kazunogawa hydroelectric power project were carefully examined and necessary modifications were done to a new machine for Omarugawa. Special care was taken in designing the cutterhead to optimize the shape for best cutting efficiency and muck removal performance.<BR>1. Open type cutterhead for lightweight machine and easy access to machine parts and tunnel wall.<BR>2. Cone-shape cutterhead for optimum disc cutter arrangement, good face stability and efficient muck removal.<BR>3. Two vertical supports in pilot and reamed shafts for flexible direction control and excellent maneuverability.<BR>Finally, it should be noted that the developed machine had successfully completed the inclined shaft without significant troubles.
収録刊行物
-
- 資源と素材
-
資源と素材 128 (6), 241-247, 2012
一般社団法人 資源・素材学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205280492544
-
- NII論文ID
- 10030600615
-
- NII書誌ID
- AA12188381
-
- ISSN
- 18840450
- 18816118
-
- NDL書誌ID
- 023819975
-
- 本文言語コード
- en
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可