シュリンクフィッタを用いた高精度光学系によるレーザ微細加工装置の開発

DOI 機関リポジトリ HANDLE 被引用文献2件 参考文献9件

書誌事項

タイトル別名
  • Study of a Laser Material Processing System with a Fine Optical Setup using a Shrink Fitter
  • シュリンクフィッタ オ モチイタ コウセイド コウガクケイ ニ ヨル レーザ ビサイ カコウ ソウチ ノ カイハツ

この論文をさがす

抄録

In order to realize fine processing with a high precision optical system, we have developed a laser processing system with galvanometer scanners and optical lenses using a shrink fitter. The shrink fitter prevents the misalignment of the lenses at the elevated temperature. Therefore fine laser spots can be obtained over the quite wider scanning width, even at elevated temperatures. We examined the possibility of application to laser processing of this lens system using the shrink fitter.<br>Diameters of the lenses used in this study were 160 mm so that the laser spots could be scanned over the width of 100 mm, in both directions of the X-axis and Y-axis. There was large distortion of the laser beam which was inherent to each lenses and can not be removed by mechanical adjustment So we introduced the formula to correct the beam path using the least square method. Finally, we developed the fine laser processing system using shrink fitter.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (9)*注記

もっと見る

キーワード

詳細情報

問題の指摘

ページトップへ