非回転工具を用いた自由曲面上への6軸制御超精密マイクロ溝加工

DOI Web Site 被引用文献2件 参考文献9件

書誌事項

タイトル別名
  • 6-axis Control Ultraprecision Microgrooving on Sculptured Surfaces with Non-rotational Cutting Tool
  • ヒカイテン コウグ オ モチイタ ジユウ キョクメン ジョウ エ ノ 6ジク セイギョ チョウセイミツ マイクロ ミゾ カコウ

この論文をさがす

抄録

In optical electronics systems, particular optical devices such as mirrors, lenses, diffraction grating, etc. play respective roles. Therefore, many optical devices are combined to consist of a optical system. This causes the problem that the arrangement error of these devices influences the total accuracy of optical system. In addition, new optical devices with multi-function, e.g. diffraction and focusing, have been recently required to miniaturize optical systems and to decrease cost. However, their shape is generally very complicated. Typical example is such a shape as curved microgrooves on a 3-dimensional complex surface. To machine the shape, milling or turning by use of a rotational cutting tool is not suitable for tool interference. In the study, a non-rotational cutting tool is thus employed. In case of machining microgrooves on sculptured surface with a non-rotational cutting tool, 6-axis control is necessary to control tool attitude and tool direction. The study deals with the development of CAM system for 6-axis control ultraprecision grooving. From the experiments of creating microgrooves on a spherical surface and a sculptured surface, it is found that microgrooving on their surfaces is possible by 6-axis control.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (9)*注記

もっと見る

関連プロジェクト

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ