肌隙を有するせん断型摩擦ダンパーのすべり耐力に関する研究

DOI

書誌事項

タイトル別名
  • FRICTIONAL RESISTANCE OF SHEAR-TYPE FRICTION DAMPERS WITH LAP GAP

抄録

Sixteen shear-type friction dampers were made and tested under cyclical loading to investigate the effect of the lap gap on the frictional resistance of the damper. The test results have indicated that the frictional resistance of a shear-type friction damper depends not only upon the tensile force by the high-strength bolts that clamp the slipping steel plate but also strongly upon the lap gap. Based on the experimental results, a formula for assessing the effect of the lap gaps on the frictional resistance of the damper was developed. Comparisons between the measured frictional resistances and the predicted ones have indicated that the frictional resistance of a shear-type friction damper with lap gap could be evaluated by the proposed formula very well.

収録刊行物

  • 鋼構造論文集

    鋼構造論文集 16 (64), 64_41-64_48, 2009

    社団法人 日本鋼構造協会

キーワード

詳細情報 詳細情報について

  • CRID
    1390001205313927296
  • NII論文ID
    130004955736
  • DOI
    10.11273/jssc.16.64_41
  • ISSN
    18840329
    18809928
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ