減速比の大きい無段変速機の纎維機械への応用

DOI

書誌事項

タイトル別名
  • Use of Stepiess Adjustable-speed Drive of Large Reduction-ration Textile Machinery
  • Part 1 : Trial Production
  • (第1報) 無段変速機の試作

抄録

The purpose of the present paper : As the first step to this study, the author produced a stepless adjustable-speed drive having a lame reduction-ratio and measured the horse-power transmited by the drive. He then de research into the efficiency and trarssmission theory of it.<BR> The results of this research :<BR> (1) When the stepless adjustable-speed drive uses a differential gear with cone-belt, we can mechanically change the output revolution speed to at least 1-2000 r.p.m. from the input revolution speed of 1 500 r.p.m.. At the same time, we can get an efficiency of 80% or more.<BR> (2) By using cone-belt, the slip-loss becomes lamer as the output horse-power increases. It is, therefore, possible to improve the efficiency of s. a. s. mechanism by exchanging the cone-belt with P. L. V. chain system.<BR> (3) Finally, it is possible to make this driving mechanism usable on textile machinery.

収録刊行物

  • 繊維機械學會誌

    繊維機械學會誌 12 (3), 178-182, 1959

    社団法人 日本繊維機械学会

詳細情報 詳細情報について

  • CRID
    1390001205324235392
  • NII論文ID
    130001584276
  • DOI
    10.4188/transjtmsj1948.12.178
  • ISSN
    18838715
  • 本文言語コード
    ja
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ