高周波微小容量測定装置を検出部とするスライバ太さ自動制御の基礎的な研究
書誌事項
- タイトル別名
-
- Study on Automatic Control of Sliver Thickness by High-Frequency Small Capacitance MesuringPrinciple
- Part 1 : Constitution of the Automatic Controller and Properties of the Detecting Means
- (第1報) 制御装置の構成と検出部特性
抄録
The automatic controller under this study is bult of the following apparatus:<BR>Process- Intersecting gill box.<BR>Detecting Means- High-frequency small capacitance measuring equipment. (Uster evenness tester)<BR>Final control element- Electric-oil pressure power actor. Positive, infinitely variable speed chain gear box.<BR>Control means- PID controller<BR>The major causes for variations in the static properties of the detecting means are:<BR>(1) Make-up of the measuring condenser.<BR>(2) Amplification degree of the measuring equipment.<BR>(3) Dielectric constant of the fibers in a measured sliver.<BR>(4) Moisture content of the fibers in the sliver measured.<BR>(5) Deviation of the adjusted point.<BR>The adjusted point is a point where the two frequencies of the oscillators in the adapter coincide when nothing is contained in the measuring condenser. This point shifts by variations in the temperature and relative humidity of the room.<BR>The time constant of the detecting means is about 0.20 sec in normal and 1.6 sec in inert.
収録刊行物
-
- 繊維機械學會誌
-
繊維機械學會誌 17 (9), 661-666, 1964
社団法人 日本繊維機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205325107200
-
- NII論文ID
- 130001597442
-
- ISSN
- 18838715
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可