孔縁補強材を有つ有孔板の撓曲應力

DOI

書誌事項

タイトル別名
  • Flexural Stresses in a Plate with a Flanged Circular Hole.
  • Investigations on the Stress Concentration at Discontinuities in Ship Structures. Report 5
  • 船體構造部分の不連續箇所に於ける應力集中に關する研究 第五報

説明

The object of the present work is to study the effect of coaming plates on the flexural stresses in a deck plating. Although flexural stresses in a plain perforated plate were dealt with some years ago by W. G. Bickley, I. Nakayama and J. N. Goodier, those problems with a flanged circular hole seem to have never been treated. The solution of the problem is easily obtained by using the results of plane stresses described in my previous paper [J. of Zosen Kiokai, Vol. 54 (1934)].<br>In case of the infinitely strong coaming plate, the solution entirely agreed with that of a plain perforated plate under some corresponding forces. The first part of this paper dea's with mathematical analysis of the problem and the 2nd part numerical calculations for practical examples. As a supplement, the correspondency between a perforated plate under some plane forces and a bent plate clamped at the rim of a hole is treated.

収録刊行物

  • 造船協會會報

    造船協會會報 1938 (63), 35-53, 1938

    社団法人 日本船舶海洋工学会

詳細情報 詳細情報について

  • CRID
    1390001205355891200
  • NII論文ID
    130003888169
  • DOI
    10.2534/jjasnaoe1903.1938.63_35
  • ISSN
    18842054
  • データソース種別
    • JaLC
    • Crossref
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ