粉体容器中の初期空間率分布のX線透視撮影による測定

書誌事項

タイトル別名
  • Measurement of initial porosity distribution in a powder cell by X-ray radiograph.
  • フンタイ ヨウキチュウ ノ ショキ クウカンリツ ブンプ ノ Xセン トウシ

この論文をさがす

抄録

Homogeneous powder packing into a powder cell is one of the fundamental and also important problems which should be urgently elucidated in powder technology. For example, to get a sufficient mechanical strength of sintered powder chips in fine ceramics or electronics industry, a good homogeneous powder packing method should be developed. However, it has not been sufficiently established up to now.<br>In this paper, from such a point of view, the initial powder packing states in different powder cells with one to five powder feeding points were systematically radiographed by X-ray, and their initial powder porosity (or powder bulk density) distributions were quantitatively analyzed by applying the analysis method presented by the authors. As the result, the following conclusions were obtained.<br>(1) In every type of powder packing, the minimum porosity column was generated just under the powder feeding points.<br>(2) The interference effect between two neighbouring powder feeding points changed remarkably depending upon test powder. That is, the porosity at the central region between two feeding points changed from the minimum value of the porosity distribution to the maximum one with the change of test powder.

収録刊行物

  • 材料

    材料 36 (410), 1192-1197, 1987

    公益社団法人 日本材料学会

詳細情報 詳細情報について

問題の指摘

ページトップへ