薄板材における疲労き裂開閉口点の測定とその問題点について

書誌事項

タイトル別名
  • Measurement of Fatigue Crack Opening and Closing Points in Thin Plate Specimen and It's Difficulties.
  • ウスイタザイ ニ オケル ヒロウ キレツ カイヘイコウテン ノ ソクテイ ト

この論文をさがす

抄録

The measurement of fatigue crack tip opening and closing points in a machine element with complicated shape is expected to involve difficulties. In the present study, the measurement of crack opening and closing points in a center notched thin plate was carried out by the unloading elastic compliance method and the strain interference method, and the application of these methods to an actual machine equipment was discussed. The strain measurements were carried out at several positions around the notch and crack for the purpose of determining crack opening and closing points. When the bending of the specimen arises during a push-pull fatigue process, the measurement of crack opening and closing points becomes more difficult unless the proper measuring position is chosen. However, when the strain function consisting of strains measured at two diffent positions on the same longitudinal axis is used in the case of strain interference method, the crack opening point can easily be measured with sufficient accuracy.

収録刊行物

  • 材料

    材料 41 (465), 951-956, 1992

    公益社団法人 日本材料学会

被引用文献 (1)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ