書誌事項
- タイトル別名
-
- Effect of Hole Diameter on Compressive Strength of Unidirectional AFRP. Application of Two Failure Criteria.
- 1ホウコウ AFRP ノ アッシュク キョウド ニ オヨボス エンコウケイ ノ
- Application of Two Failure Criteria
- 二種類の破損基準の適用
この論文をさがす
抄録
Static compression tests of unidirectional AFRP with a circular hole are carried out. The experimental result shows that the compressive strength of unidirectional AFRP containing a circular hole depends on the hole diameter. As the hole diameter increases, the compressive strength tends to be lower in spite of a decrease in the stress concentration factor αT.<br>A good agreement between the experimental and the predicted compressive strength is observed by the application of two failure criteria. For the specimen with small hole diameter, the strength can be predicted by the Soutis' theory based on the stress distribution around the hole and linear fracture mechanics. For the specimen with large hole diameter, the strength can be predicted by the point-stress criterion (d0=1.5mm).<br>Finally, the failure mechanism of the unidirectional AFRP subjected to compressive loads is discussed.
収録刊行物
-
- 材料
-
材料 44 (499), 464-469, 1995
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205391573632
-
- NII論文ID
- 110002292842
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 3607923
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可