金属材料の疲労き裂発生と切欠き感度の関係

書誌事項

タイトル別名
  • Relation between the characteristics of crack initiation of metals and their notch sensitivity in fatigue.
  • キンゾク ザイリョウ ノ ヒロウ キレツ ハッセイ ト キリカキ カンド ノ

この論文をさがす

抄録

Cracking behavior has been investigated through successive observations on the surfaces of five steels, an alpha brass, an age-hardened Al-alloy and a pure titanium, with particular emphasis on the relation between the crack initiation process and the notch sensitivity in fatigue.<br>Two types of crack initiation process were observed. One was the process where cracking starts at a very small region compared with a grain diameter, as observed on an Al-alloy. The other was the one where a fatigue crack initiates not at a point but at a definite region having the size comparable to the grain diameter, as observed on other metals.<br>The difference in cracking characteristics was related to the thickness of surface layer. The notch sensitivity based on fatigue crack initiation decreased with increasing thickness. An Al-alloy with the thinnest thickness had the highest sensitivity, whereas a pure titanium the lowest. For a sharp notch, however, a non-propagating crack appeared, so that the fatigue limit did not decrease drastically with increasing notch sharpness, leading to rather low sensitivity. The fatigue strength of the notched members can be uniquely assessed from the relation between the reciprocal of notch root radius and the elastic maximum stress at the fatigue limit, based on the new “Linear Notch Mechanics” concept.

収録刊行物

  • 材料

    材料 36 (409), 1060-1064, 1987

    公益社団法人 日本材料学会

被引用文献 (5)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ