Ｘ線回折による各種材料の疲労破面の残留応力および半価幅測定

DOI Web Site

書誌事項

タイトル別名
  • Residual Stress and Half-Value Breadth of Fatigue-Fractured Surfaces of Various Structural Steels Measured by X-Ray Diffraction
  • Xセン カイセツ ニ ヨル カクシュ ザイリョウ ノ ヒロウ ハメン ノ ザン

この論文をさがす

抄録

Residual stress and half-value breadth of the fatigue-fractured surfaces of various steels-such as WT-80c, SUS 403, SPV 50, SCMV 4 and S35C-were measured by X-ray diffraction. Fatigue tests were performed under the stress ratio R of 0 to 0.4. The half-value breadth b was found to increase with increasing the maximum stress intensity factor Kmax but the residual stress σr usually decreased with increasing Kmax.<br>The residual stress on the fatigue-fractured surface is said to be decomposed into four parts: that is (1) tensile residual stress due to monotonic deformation, (2) the release of stress due to fractured surface roughness, (3) compressive stress due to crack closure, and (4) compressive stress due to reversible plastic deformation. The present results were discussed in relation to the latter three causes.<br>From the measurement of the roughness of fractured surface, it was shown that the main reason why σr decreased with increasing Kmax was the effect of roughness.<br>Under the constant Kmax condition, the larger the R value was, the larger the σr was. This may be related to the reversible plastic deformation and/or to crack closure.<br>Other factors which influence the relative position of σr-Kmax curve, such as yield stress, fracture mechanism, were also discussed.

収録刊行物

  • 材料

    材料 33 (365), 204-208, 1984

    公益社団法人 日本材料学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ