Crack growth characteristics of Vickers indented glass plate specimen in water.
-
- KIMURA Yuji
- Kogakuin University
-
- YAMAMOTO Shigeo
- Kogakuin University
-
- SEKIYA Michio
- Kogakuin University
-
- KUNIO Takeshi
- Faculty of Science and Engineering, Keio University
Bibliographic Information
- Other Title
-
- 加傷板ガラスの水中におけるき裂伝ぱ挙動
- カショウ バン ガラス ノ スイチュウ ニ オケル キレツ デンパ キョドウ
Search this article
Abstract
The present authors have been investigating the delayed fracture process of soda-lime-silica glass in water by conducting four point bending tests using plate specimens with initial cracks and an indentation pit generated by Vickers diamond indentation. The crack growth behavior in the delayed fracture process, however, has not yet been clarified. Therefore, in this paper, the crack growth characteristics of the same glass meterials were investigated by employing the same plate specimens. At the same time, double cantilever beam test was conducted. Then, KI analysis of a semi-elliptical crack was applied to make some correction to a tentatively calculated KI value. In the analysis, the morphology effect of lateral crack was taken into consideration.<br>As a result, the crack growth rate data obtained by four point bending tests were found to agree well with the double cantilever beam test data obtained in this experiment as well as those by S.M. Wiederhorn. Therefore, it is concluded that the KI-V relationship can be evaluated by the four point bending delayed fracture tests.
Journal
-
- Journal of the Society of Materials Science, Japan
-
Journal of the Society of Materials Science, Japan 36 (401), 160-165, 1987
The Society of Materials Science, Japan
- Tweet
Details 詳細情報について
-
- CRID
- 1390001205391760896
-
- NII Article ID
- 110002297017
-
- NII Book ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL BIB ID
- 3131998
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed