書誌事項
- タイトル別名
-
- Effect of Various Chemical Admixtures on Characteristics of Mixture Proportion and Workability of Roller Compacted Concrete for Pavement.
- RCCPヨウ コンクリート ノ ハイゴウ オヨビ ワーカビリティー トクセイ
この論文をさがす
説明
In this report, air-entraining, high-range water reducing admixture A, water reducing agent for extremely stiff consistency concrete B, admixture B with viscosity increasing admixture C and normal water reducing agent D were used and each one was added to the concrete for roller compacted pavement having the water cement ratio of 0.37. In order to compare the effect of each admixture on the mixture proportion and workability of concrete, the unit water content and sand percentage were varied and vibrating compaction value measured by a Swedish-type Vebe apparatus, compaction ratio, surface vibrating compaction time to get a fully compacted state and segregation degree taken place by falling were determined. The conclusions were as follows;<br>(1) In the case of a constant unit water content, the minimum vibrating compaction value, minimum surface vibrating compaction time and maximum compaction ratio were obtained at a sand percentage for each admixture but the segregation degree became maximum. This phenomenon was closely related to the fluidity and viscosity of mortar component and mixture proportion such as the ratio of mortar content to coarse aggregate content.<br>(2) In the case of a constant vibrating compaction value and maximum compaction ratio, the sand percentage was least by adding admixture B and the unit water content was least by adding A or C, and the surface vibrating compaction time was least by adding admixture D and the segregation degree was least by adding A or C, respectively.<br>(3) It can be thought that admixture B is effective to improve the abrasion resistance and A or C is of use to reduce the unit cement content and segregation degree. An admixture with viscosity increasing admixture is more effective to reduce the segregation degree.
収録刊行物
-
- 材料
-
材料 44 (506), 1378-1383, 1995
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205392393344
-
- NII論文ID
- 110002292754
- 10003996567
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 3634969
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDLサーチ
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可