-
- 長山 清和
- 東京都立科学技術大学大学院
-
- 郷藤 新之助
- 東京都立科学技術大学大学院
-
- 寺崎 隆喜
- 東京都立科学技術大学大学院
-
- 田中 喜久昭
- 東京都立科学技術大学大学院工学研究科航空宇宙工学専攻
-
- FISCHER F. D.
- Inst. für Mechanik, Montanuniversität Leoben
-
- CAILLETAUD G.
- Centre des Matériaux, Ecole Nationale Supérieure des Mines de Paris
書誌事項
- タイトル別名
-
- An Experimental Study of TRIP Behavior in a Cr-Ni-Mo-Al-Ti Maraging Steel. Quantitative Identification of Backstress Evolution and Iso-Volume Fraction Lines.
- Cr Ni Mo Al Ti マルエージング コウ ノ TRIP キョドウ ニ カンスル ジッケンテキ コウサツ ハイ オウリョク ノ シンテンリョウ ト トウ ヘンタイ ブンリツセン ニ ツイテ
- Quantitative Identification of Backstress Evolution and Iso-Volume Fraction Lines
- 背応力の進展量と等変態分率線について
この論文をさがす
説明
The quantitative identification of the backstress evolution is carried out in a Cr-Ni-Mo-Al-Ti maraging steel under thermomechanical loading conditions. The evolution depends on the direction of the applied stress; tensile, compressive or shear. The iso-volume fraction lines (the iso-ξ lines) are determined between the transformation-start line and the transformation-finish line on the applied hold stress-temperature plane. The iso-ξ lines are composed of a tensile-branch and a compressive-branch, each of which is parallel to the martensite-start line. The cross point of the tensile- and compressive-branches of the iso-ξ line shifts to the direction of the backstress evolution. The almost hold stress-independent martensite-finish line is proved to be attributed to the backstress evolution.
収録刊行物
-
- 材料
-
材料 51 (3), 255-260, 2002
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205392948992
-
- NII論文ID
- 110002301864
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 6106756
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可