圧裂試験における破壊開始位置と破壊荷重についてのGriffith理論による検討

書誌事項

タイトル別名
  • Position and load of failure in Brazilian test; A numerical analysis by Griffith criterion.
  • アツ レツシケン ニ オケル ハカイ カイシ イチ ト ハカイ カジュウ ニ
  • A Numerical Analysis by Griffith Criterion

この論文をさがす

抄録

Failure in the Brazilian test (diametral compression of a disc) has been numerically analyzed on the basis of the Griffith fracture criterion. The analysis indicates that the angle subtended by the loaded arc strongly affects the position and the load of failure. Failure occurs away from the center of the disc for small angles, but it initiates at the center for the angle over a certain degree. The load of failure increases with increasing angle, and the derivative of the load against angle changes abruptly at that certain angle. These results agree with the experimental studies performed by others.<br>It is erroneous to calculate the splitting tensile strength as PRL without respect to the angle subtended by the loaded arc, where P is the load of failure, R is the radius of the disc, and L is the thickness of the disc. A definition of the splitting tensile strength is suggested. For practical purposes, the suitable length of the loaded arc and an approximation of the splitting tensile strength are suggested.

収録刊行物

  • 材料

    材料 36 (410), 1219-1224, 1987

    公益社団法人 日本材料学会

被引用文献 (2)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ