書誌事項
- タイトル別名
-
- Forming Characteristics of Bio-coke with a Mixture of Bamboo and Carbonized Japanese Cedar
- タケ ト スギ タンカブツ ノ コンゴウ シリョウ ニ ヨル バイオコークス ノ セイケイ トクセイ
この論文をさがす
抄録
The utilization of unused biomass such as logging residues and broadleaf trees has come to attract attention to protect forests and satoyamas (a Japanese term for undeveloped woodlands near populated areas) in Japan. In this study, the modification of bio-coke fuels as an alternative to coal coke is investigated by using bamboo and Japanese cedar, which are the typical domestic woody biomass in forests and satoyamas. To improve the compressive strength under high temperature environment and the heating value of bio-coke, carbonized Japanese cedar is mixed with bamboo. The effect of the carbide mixture on the forming characteristics of bio-coke such as density, compressive strength, and heating value are experimentally clarified. The results obtained in the present study are as follows: (1) the density of bio-coke increases with increase in forming temperature and forming pressure, but is reduced by the addition of carbide as the thermoplastic polymer is reduced (2) the increase in carbide reduces the compressive strength under normal temperature environment and improves the compressive strength under high temperature environment. When the carbide content was 30%, the compressive strength under high temperature environment was 3.26MPa. (3) The addition of carbide is an effective way to improve the compressive strength under high temperature environment and to enhance the heating value of bio-coke.
収録刊行物
-
- Journal of Smart Processing
-
Journal of Smart Processing 1 (2), 63-70, 2012-03-20
一般社団法人 スマートプロセス学会 (旧高温学会)
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001205413343744
-
- NII論文ID
- 10030516153
-
- NII書誌ID
- AA12553487
-
- COI
- 1:CAS:528:DC%2BC38XhtFCgt73J
-
- ISSN
- 21871337
- 2186702X
-
- NDL書誌ID
- 024272650
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可