Development of Design Methodology for 60Hz Wireless Power Transmission System
-
- Ishida Hiroki
- Department of Applied Physics, Okayama University of Science
-
- Furukawa Hiroto
- National Institute of Technology, Toyama college, Hongo Campus
-
- Kyoden Tomoaki
- National Institute of Technology, Toyama College, Imizu Campus
この論文をさがす
抄録
<p>We previously reported a 60Hz wireless power transmission (WPT) system, which is a system that uses the common utility frequency. In the study reported in paper, we solved several issues in order to install this system in a small electric vehicle. First, an accelerated finite difference time domain (FDTD) method using a graphics processing unit was developed to solve the issue of computation time. Next, theoretical equations for the transmission efficiency (η) and power (Pout) that include the stray load loss were derived from an equivalent circuit analysis. A new device was designed based on these theoretical equations, where by η =70% and Pout =451W were achieved for a transmission distance of 150mm. Finally, we attempted to wirelessly charge of a lead storage battery. The overall efficiency of the wireless charging system was maintained at 60% during battery charging.</p>
収録刊行物
-
- IEEJ Journal of Industry Applications
-
IEEJ Journal of Industry Applications 5 (6), 429-438, 2016
一般社団法人 電気学会
