伸線強加工高強度鋼の疲労き裂発生寿命に及ぼす非拡散性水素の影響

書誌事項

タイトル別名
  • Influence of Irreversible Hydrogen on the Fatigue Crack Initiation Life in Cold Drawn High Strength Steel
  • シンセン キョウカコウ コウキョウドコウ ノ ヒロウ キレツ ハッセイ ジュミョウ ニ オヨボス ヒカクサンセイ スイソ ノ エイキョウ

この論文をさがす

抄録

This paper discusses the influence of irreversible hydrogen on the fatigue crack initiation life in cold drawn eutectoid steel. Fatigue tests were conducted for the sample having an artificial small notch fabricated by focused ion beam (FIB) system. Samples were cathodically hydrogen charged, and internal hydrogen states were changed as follows : (a) virgin sample and (b) the one that contained only irreversible hydrogen. In the notched sample, the fatigue strength was lower than that of smooth sample. The slope of the S-N curves became steeper and the influence of irreversible hydrogen was not observed. This is because the fatigue life was almost dominated by fatigue crack propagation life, resulted from a crack being easily initiated at a notch root owing to high stress concentration. The surface fatigue crack propagation rate, obtained by using fatigue life data for notched sample, was not affected by irreversible hydrogen. Using the obtained fatigue crack propagation rate and the rate in high vacuum corresponding to the propagation in a fish-eye region, the crack initiation life from an internal inclusion for smooth sample was estimated, and it shows that the irreversible hydrogen reduced the fatigue crack initiation life, compared with those of a virgin sample. This is a reason why the fatigue strength of a smooth sample was decreased by irreversible hydrogen.

収録刊行物

  • 材料

    材料 57 (11), 1077-1083, 2008

    公益社団法人 日本材料学会

被引用文献 (2)*注記

もっと見る

参考文献 (6)*注記

もっと見る

関連プロジェクト

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ