Determination of the Shear Modulus of Wood with Standard Shear Block Specimen
-
- UKYO Seiichiro
- Dept. of Wood Eng., Forestry and Forest Products Res. Inst.
-
- KARUBE Masahiko
- Dept. of Wood Eng., Forestry and Forest Products Res. Inst.
-
- HARADA Masaki
- Dept. of Wood Eng., Forestry and Forest Products Res. Inst.
-
- HAYASHI Tomoyuki
- Dept. of Wood Eng., Forestry and Forest Products Res. Inst.
-
- MURATA Koji
- Div. of Forest and Biomaterials Sci., Grad. School of Agr. Kyoto Univ.
Bibliographic Information
- Other Title
-
- いす型せん断試験体による木材のせん断弾性係数の決定
- イスガタ センダン シケンタイ ニ ヨル モクザイ ノ センダン ダンセイ ケイスウ ノ ケッテイ
Search this article
Abstract
Shear moduli of wood were obtained with the shear block test, using the strain distribution measured with Digital Image Correlation (DIC). For comparison, the shear moduli were also measured by the torsion of rectangular bars, which afterward were processed to fabricate shear block specimens. A good agreement was found between the shear moduli obtained from the shear block and the torsion tests. The relation between the shear modulus and the nominal shear strength obtained from the shear block test showed good correlation (correlation coefficient of 0.59). Thus it is concluded that by applying the DIC the shear modulus can be determined from shear block test and the shear modulus can be used as an estimator of the nominal shear strength.
Journal
-
- Journal of the Society of Materials Science, Japan
-
Journal of the Society of Materials Science, Japan 57 (4), 317-321, 2008
The Society of Materials Science, Japan
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001205420038784
-
- NII Article ID
- 130002085669
-
- NII Book ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL BIB ID
- 9477775
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed