書誌事項
- タイトル別名
-
- Effect of Implicit Integration Scheme in Residual Stress Analysis of Quenching Considering Transformation Plasticity and Kinematic Hardening
- ヘンタイ ソセイ オヨビ イドウ コウカソク オ フクム ヤキイレ ザンリュウ オウリョク カイセキ ニ オケル インテキ セキブン ノ コウカ
この論文をさがす
抄録
The thermo-elastoplastic analysis considering the phase transformation has been widely used to predict the residual stress and distortion going with the heat treatment. In the heat treatment simulation, transformation plasticity should be treated implicitly, because which is considered to have relevance to current stress field. Furthermore, complex mechanical response caused by temperature change and phase transformation often leads to stress reversals, which possibly requires kinematic hardening models in the heat treatment simulation. However, few previous studies consider both fully-implicit formulation and kinematic hardening model in the thermo-elastoplasitic analysis including transformation plasticity. In this paper, therefore, thermo-elastoplastic constitutive relations considering the transformation plasticity and kinematic hardening are formulated with the return mapping algorithm, and heat treatment simulations of the steel cylinder are performed based on the proposed formulation. The calculated residual stresses show good agreement with the XRD measurements, and the capability of the fully implicit stress integration with the kinematic hardening model is demonstrated.
収録刊行物
-
- 材料
-
材料 64 (4), 258-265, 2015
公益社団法人 日本材料学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205445011712
-
- NII論文ID
- 130005064895
-
- NII書誌ID
- AN00096175
-
- ISSN
- 18807488
- 05145163
-
- NDL書誌ID
- 026358295
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可