軟鋼－アルミニウム合金メカニカルクリンチ接合体における加工硬化と応力集中に起因した水素脆化

DOI Web Site Web Site 被引用文献2件 参考文献7件

書誌事項

タイトル別名
  • Hydrogen Embrittlement Caused by Work Hardening and Stress Concentration on Mild Steel/Aluminum Clinched Joint
  • ナンコウ-アルミニウム ゴウキン メカニカルクリンチ セツゴウタイ ニ オケル カコウ コウカ ト オウリョク シュウチュウ ニ キイン シタ スイソゼイカ

この論文をさがす

抄録

<p>In order to clarify influence of hydrogen on fracture behavior of clinched joint, we performed tensile shear tests and fracture analyses. As verification tests, a hardness test, tensile tests with plate specimens and hydrogen concentration measurement were conducted. The tensile shear tests were conducted with and without hydrogen charging, respectively. The tensile shear test results showed that the maximum load and fracture displacement of the hydrogen-charged specimen were smaller than that of the noncharged specimen. The fracture analyses clarified that macroscopically fracture surface of the joint part on the hydrogen-charged specimen did not deform much, but microscopically showed large dimples with high aspect ratio. Fracture analysis results indicated that a crack growth on the joint part was assisted by hydrogen-enhanced void nucleation, growth and coalescence and hydrogen-enhanced localized plasticity. The hardness of the joint part was higher than that of the material before the joining process. On the tensile test, the maximum load and fracture displacement were not changed by hydrogen charging. The hydrogen concentration measurement showed that the joint was charged with 1 ppm hydrogen. These results show that work hardening and stress concentration have an important role on hydrogen embrittlement on clinched joints. </p>

収録刊行物

  • 材料

    材料 67 (2), 170-176, 2018

    公益社団法人 日本材料学会

被引用文献 (2)*注記

もっと見る

参考文献 (7)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ