Cr-Mo-V鋼のクリープ中の非線形音響特性の変化と微細組織の関係

DOI Web Site 被引用文献2件 参考文献24件

書誌事項

タイトル別名
  • Evolutions of Nonlinear Acoustic Characterizations and Microstructural Change during Creep in Cr-Mo-V Steel
  • Cr-Mo-Vコウ ノ クリープ チュウ ノ ヒセンケイ オンキョウ トクセイ ノ ヘンカ ト ビサイ ソシキ ノ カンケイ

この論文をさがす

抄録

We studied the relationship between microstructural change and the evolutions of two nonlinear acoustic characterizations with electromagnetic acoustic resonance (EMAR) during creep in Cr-Mo-V steels and the correlation between two nonlinear acoustic characterizations. One was higher harmonic generation and other resonant frequency shift. EMAR was a combination of the resonant acoustic technique with a non-contact electromagnetic acoustic transducer (EMAT). We used axial-shear-wave EMAT, which transmits and receives SH wave propagating in the circumferential direction of a cylindrical specimen. The EMAT had a capability for easily detecting two nonlinear acoustic characterizations for cylindrical one. To measure higher harmonics, excitation of the EMAT at half or one third of the resonance frequency caused the standing wave to contain only the second or third-harmonic component, which was received by the same EMAT to determine the second or third-harmonic amplitudes. In measurement of resonant frequency shift, as the excitation level increases, resonance frequency was shifted and the shift manifested the elastic nonlinearity. Measured two nonlinear acoustic characterizations showed the peaks at 30% and the minimum at 50% of the total life, respectively. We interpreted these phenomena in terms of dislocation mobility and restructuring, with support from the SEM and TEM observation. This noncontact resonance-EMAT measurement can monitor the evolution of the surface-shear-wave nonlinearity throughout the creep life and has a potential to assess the damage evolution and to predict the creep life of metals.

収録刊行物

  • 材料

    材料 62 (2), 60-67, 2013

    公益社団法人 日本材料学会

被引用文献 (2)*注記

もっと見る

参考文献 (24)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ