書誌事項
- タイトル別名
-
- A study on stabilization of operation time for hydraulic operating circuit breaker (Development of hydraulic stabilization system holding constant high pressure)
抄録
A hydraulic operation stabilizing system was developed for a hydraulic operating mechanism of a gas circuit breaker (GCB). Air bubbles and cavities, created in hydraulic fluid by the movement of the operating mechanism, have an effect on the movement of valves and pistons within the operating mechanism. The hydraulic operation stabilizing system consists of a hydraulic circuit and a latch system. The purpose of the hydraulic circuit is to limit the change in pressure during the initial operating time of the open and close operation, and to keep the pressure high after the operation has been completed. The latching system is used to control the movement of the main piston. The stabilizing system also detects the piston position at its open end, and the control valves through a simple hydraulic circuit and not by electrical means. An experimental hydraulic mechanism with an operation stabilizing system was built, and stable operations were confirmed.
収録刊行物
-
- 日本機械学会論文集
-
日本機械学会論文集 81 (822), 14-00402-14-00402, 2015
一般社団法人 日本機械学会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001205515800064
-
- NII論文ID
- 130005005036
-
- ISSN
- 21879761
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可