17 工場の敷地規模と形態特性

DOI Web Site Web Site

書誌事項

タイトル別名
  • 17) CHARACTORS ON THE SHAPE OF INDUSTRIAL FACTORIES FOR THEIR SIZE OF SITES
  • 工場の敷地規模と形態特性
  • コウジョウ ノ シキチ キボ ト ケイタイ トクセイ

この論文をさがす

抄録

After the study of the shaping indices of the industrial factories in Hanshin Metropolitan Region from the standpoint of the industrial district planning, the author reached following tendencies. They are: 1. There are always the room for the expansion of plants within the site of about half of factories. 2. The bulk ratio of factories is rather low, and the size of the site is the larger, its ratio becomes the lower. 3. Sporting field in the site of factories is more specified and more diversified, as the size of the site becomes larger. 4. The form of the site becomes "square" as the size increases. According to these tendencies, the author recommended the followings: 1. Factories smaller than 3300 square meters in their lot size shall be treated as a group of a single lot. 2. Factories larger than 66000 square meters in their size of sites shall be treated as an estate. 3. In the middle part between these two classes there are other factories. They are able to be divide into two groupes by the lot size of 16500〜19800 square meters, the larger group is similar to the second class and the smaller to the first. Treatment in the planning technic shall be established by each class or group concerning the district planning.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ