鋼モルタル板を用いた座屈拘束ブレースの実験的研究

DOI Web Site Web Site 被引用文献2件 参考文献1件

書誌事項

タイトル別名
  • EXPERIMENTAL STUDY ON BUCKLING-RESTRAINED BRACES USING STEEL MORTAR PLANKS
  • 鋼モルタル板を用いた座屈拘束ブレースの実験的研究 : 座屈モード数および圧縮引張耐力比と摩擦力の評価
  • コウ モルタルバン オ モチイタ ザクツコウソク ブレース ノ ジッケンテキ ケンキュウ : ザクツモードスウ オヨビ アッシュク ヒッパリ タイリョクヒ ト マサツリョク ノ ヒョウカ
  • -Evaluation of the buckling mode number, compression-to-tension strength ratio and friction force-
  • －座屈モード数および圧縮引張耐力比と摩擦力の評価－

この論文をさがす

抄録

The authors have proposed the buckling-restrained braces (BRBs) using steel mortar planks, providing stable hysteretic behavior under the high axial-strain conditions. The compressive strength of BRBs generally tends to be higher than the tensile strength. The authors understood that it was because of friction force between the surface of core plate and the restraining part, and that the magnitude of friction force was related to the buckling mode number resulting in the increase of contact points. A set of prediction formulas for the buckling mode number has been proposed in the authors' previous study. In this paper, the validity of the proposed formulas for the buckling mode number of plastic region of core plate is examined by the test results of strain gauge measurement on the core plate from the cyclically axial-loading tests. Furthermore, the relationship between the strength ratio of the compressive to tensile strength and the buckling mode number is evaluated. As a result, 1) the buckling mode number is approximately proportional to the slenderness ratio of the plastic region of core plate, and 2) the proposed formulas, considering the location of fixed point between the core plate and restraining part, correspond quite well to the test results in the relationship between the compression-to-tension strength ratio and the axial strain amplitude.

収録刊行物

被引用文献 (2)*注記

もっと見る

参考文献 (1)*注記

もっと見る

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ