Development of Hybrid Metallic Micro Rolling Process

DOI
  • Willy Kurnia
    Tokyo Institute of Technology Dept. Mechanical & Control Engineering
  • Masahiko Yoshino
    Tokyo Institute of Technology Dept. Mechanical & Control Engineering

抄録

In order to fabricate ultra fine structures with different kind of shape on the metallic materials surface, a hybrid metallic micro rolling process to transfer micro patterns onto metallic materials surface is developed. Nano Plastic Forming (NPF) on pure aluminium (Al 99%) combined with coating technique is used to produce the Nickel dies for the rolling process. Experimental works with 0.1 N-1.0 N indentation load variations and 2.5 um-7.5 um pitch variations using knife edge diamond tool are conducted to study the feasibility of this technique. Based on the experimental results, the feasibility of this method to fabricate microstructures on metallic materials surface is concluded.

収録刊行物

キーワード

詳細情報 詳細情報について

  • CRID
    1390001205651686912
  • NII論文ID
    130004658805
  • DOI
    10.11522/pscjspe.2008a.0.733.0
  • 本文言語コード
    en
  • データソース種別
    • JaLC
    • CiNii Articles
  • 抄録ライセンスフラグ
    使用不可

問題の指摘

ページトップへ