Characteristics of a newly lapping tool using stainless steel filler with double sided lapping machine

DOI

Bibliographic Information

Other Title
  • 金属短繊維を含有したラップ工具の両面研磨への適用

Abstract

In the lapping industry, the most widely and commonly used lapping tool for hard brittle materials is the cast-iron plate. But, there are two problems associated with this lapping tool. First, it has a low removal rate. Secondly, it has a low level of resistance against corrosion. To eliminate these problems, a lapping tool impregnated with stainless steel short-fibers was developed. Using this new tool on single side lapping tests showed excellent results in removal rate of sodalime glass. For the main research, an identical tool was used on a double side lapping machine. As a result, a double efficiency rate of improvements in removal rate was accomplished.

Journal

Keywords

Details 詳細情報について

  • CRID
    1390001205659223168
  • NII Article ID
    130005479557
  • DOI
    10.11522/pscjspe.2014a.0_611
  • Text Lang
    ja
  • Data Source
    • JaLC
    • CiNii Articles
  • Abstract License Flag
    Disallowed

Report a problem

Back to top