金属光造形における積層造形条件の評価方法の再検討

DOI Web Site

書誌事項

タイトル別名
  • Reexamination of Evaluating Method of Layered Manufacturing Condition in Laser Metal Sintering Hybrid Milling Machine
  • キンゾク ヒカリ ゾウケイ ニ オケル セキソウ ゾウケイ ジョウケン ノ ヒョウカ ホウホウ ノ サイケントウ

この論文をさがす

説明

<p>To optimize the selective laser sintering process in a laser metal sintering hybrid milling machine and to shorten development times, the process conditions were evaluated in terms of the power used in subsequent milling of the processed workpiece and studies were performed using parameter design and the Mahalanobis-Taguchi system. When the optimal conditions obtained from these studies were used as in-house standards, several problems emerged, including reproducibility of the gain. These problems were reexamined in several ways, including further experiments, for the purpose of establishing a method of using milling power to evaluate sintering conditions. Specifically, we reexamined the calculation of cut weight, noise factors, measuring methods, and evaluation methods. After the reexamination, another experiment was carried out and the results were studied.</p>

収録刊行物

  • 品質工学

    品質工学 19 (6), 32-39, 2011

    一般社団法人 品質工学会

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ