-
- OHASHI Yusuke
- Tohoku University, Dept. of Nanomechanics
-
- SUZUKI Yusuke
- Tohoku University, Dept. of Nanomechanics
-
- OHNISHI Masato
- Tohoku University, Dept. of Nanomechanics
-
- SUZUKI Ken
- Tohoku University, Fracture and Reliability Research Institute
-
- MIURA Hideo
- Tohoku University, Fracture and Reliability Research Institute
Bibliographic Information
- Other Title
-
- OS0303 カーボンナノチューブ応用遠隔ひずみ計測去の検討(OS3-1 ひずみ,OS-3 非破壊評価と構造モニタリング1)
Abstract
Carbon nanotube(CNT)-dispersed resin is expected to be a highly sensitive and remote strain sensor without interconnections. Application of microwave showed the possibility of the non-contact measurement of the change of electrical impedance of the resin under dynamic load by measuring the change of its reflectivity obtained from the surface of the resin. A theoretical method to estimate the change of the intensity of the microwave reflected from the resin was discussed based on the microwave theory. The change of the reflectance under tensile strain of 11% was calculated by the method using the measured change of the impedance of the resin under the frequency range between 1Hz and 10MHz. As a result, both real and imaginary parts of the impedance changed drastically with applied strain.
Journal
-
- The Proceedings of the Materials and Mechanics Conference
-
The Proceedings of the Materials and Mechanics Conference 2011 (0), _OS0303-1_-_OS0303-3_, 2011
The Japan Society of Mechanical Engineers
- Tweet
Details 詳細情報について
-
- CRID
- 1390001205871330560
-
- NII Article ID
- 110009689448
-
- ISSN
- 24242845
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed