OS0521 時間強度によるアルミ合金の高温疲労限度線図 : その3:破壊形態に応じた線図の定式化(OS5-5 寿命予測,OS-5 材料の疲労挙動と損傷評価2)

DOI Web Site

書誌事項

タイトル別名
  • OS0521 Fatigue Strength Diagram of Aluminum Alloys at High Temperature : Part3: Formulation of Fatigue Strength Diagram

抄録

A fatigue strength diagram, applied to the estimation of fatigue strength under mean stress or residual stress, is not obvious in case of aluminum alloys because they do not have endurance limit-especially at high temperature. Thus, we make up the generalized fatigue strength diagram at N cycles of aluminum alloy at high temperature, using the strength at N cycles instead of the endurance limit, and divide the single line into the multiple ones by fracture feature; typical fatigue failure, failure with plastic deformation and the one with creep. In this study, we formulate the constitutive equations for this set of the fatigue strength curves at N cycles. Both the line for typical fatigue failure and the one for failure with plastic deformation are expressed as straight lines. The one for failure with creep is expressed as straight line or curve, which is dependent on creep mode.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ