OS0706 Effect of loading mode on very high cycle fatigue properties in high-speed tool steel
-
- SHIOZAWA Kazuaki
- University of Toyama, Graduate School of Science and Engineering
-
- YAMAMOTO Hiroto
- 富山大学大学院理工学教育部
-
- SHIMATANI Yuji
- 富山大学大学院理工学教育部
-
- NAKADA Takehiro
- ヤマハ発動機(株)
-
- YOSHIMOTO Takashi
- (株)不二越マテリアル事業部
-
- KOSHI Masao
- (株)不二越マテリアル事業部
Bibliographic Information
- Other Title
-
- OS0706 高速度工具鋼の超高サイクル疲労強度特性に及ぼす荷重負荷様式の影響(構造用材料の疲労挙動と寿命評価,オーガナイズドセッション)
Abstract
In order to study the effect of loading mode on fatigue properties of high-speed tool steel (0.7C-3 Mo-2V) in very high cycle regime, fatigue tests under axial loading and rotating bending condition were performed in laboratoiy air using the hourglass shaped specimen. From the experiment results, clear duplex S-N curve appeared in both loading conditions, that is, there were two curves composed of a surface failure mode and a subsurface failure mode. Fatigue life under axial loading condition was shorter than that under the rotating bending condition, especially in low stress amplitude level. The difference in fatigue lifetime and transition of failure mode between the loading modes was discussed from the viexoint of inclusion size, applied stress distribution across the specimen section and residual stress in surface layer.
Journal
-
- The Proceedings of the Materials and Mechanics Conference
-
The Proceedings of the Materials and Mechanics Conference 2009 (0), 267-269, 2009
The Japan Society of Mechanical Engineers
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001205872055808
-
- NII Article ID
- 110008064878
-
- ISSN
- 24242845
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed