234 衝撃引張試験時におけるひずみ速度変化の影響(OS 先進材料の力学的特性と計測技術)

書誌事項

タイトル別名
  • 234 Effect of strain rate change during impact tensile tests

抄録

In order to investigate the effect of strain rate change during dynamic tests on the stress-strain curves, an analytical study using the maximum load condition and a simple power law, σ = Bε^nε^m (ε: true strain rate, B, n, m: constants), as a constitutive equation was carried out. Three kinds of loading pulse, i.e. a usual constant incident pulse, an acceleration pulse and a deceleration pulse, were considered. It was found that the instability strain increases with the increase of acceleration parameter of loading pulses and strain rate sensitivity parameter of specimen materials. To check this analytical result, a series of dynamic tensile tests for 0.45%C steel and 2024 aluminum alloy using Hopkinson bar apparatus was performed with the three types of loading pulse. The experimental results agreed well with that predicted by the analysis.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ