C07 既設TMDの質量を見かけ上増加させることで性能向上をはかるTMDブースターの開発(M-OS6-1:運動制御とシミュレーションの融合I,M-OS6 運動制御とシミュレーションの融合,M-OS16 MBSE(モデルベースシステムズエンジニアリング)と1D-CAEジョイントセッション,「海を越え,国を越え,世代を超えて!」)

DOI Web Site

書誌事項

タイトル別名
  • C07 Development of the TMD Booster to Improve Damping Performance of Existing TMD by Increasing the Apparent Mass

説明

Recently, vibration control with tuned mass dampers (TMD) has becoming well known technology, and there are various studies and many practical realizations. For instance, TMDs are effective for vibration problems caused by human walking on long span bridges or office floors, and also building vibration caused by wind. However, sometimes, we can not get sufficient vibration suppression performance by installed TMDs. In such cases, we have to replace the installed TMD for a new large TMD. This process normally requires high cost and long time. In order to avoid this situation, we propose "TMD booster" which can improve vibration suppression performance by just attaching the TMD booster to the existing TMD. Therefore, TMD replacing process is not required. In this paper, first, the concept of the TMD booster is described, then the control method called "Direct Velocity Force Control (DIFC)" is discussed. Finally, effectiveness of the TMD booster is shown in experiments.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ