C-14 自転車走行中の3軸加速度測定に及ぼす機材および乗車姿勢の影響(自転車)

DOI Web Site

書誌事項

タイトル別名
  • C-14 Influence of riding form and bicycle parts material on three axis acceleration measurement of bicycle under running

抄録

The steering wheel of the bicycle running and the acceleration of the saddle were measured. The tire inflation pressure was used to experiment as 800kPa in the bicycle frame of the chromium-molybdenum steel and the aluminum base alloy. The tire inflation pressure was assumed to be 450kPa in the cyclo crossing car of CFR P frame. The acceleration has increased as the running speed increases. The acceleration decreases by about 30% when making it to E150 of 150° in angle of the elbow as getting on posture for E180 of 180° in angle of the elbow. The acceleration of E150 in CRF P frame has decreased to 1/3 compared with getting on posture E180 in chromium-molybdenum steel frame.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ