熱処理した炭素鋼に引張り, 圧縮あるいはねじりを行なったときの残留応力と残留ひずみについて

DOI DOI Web Site Web Site Web Site

書誌事項

タイトル別名
  • On the Residual Stresses and the Residual Strains in the Heat Treated Plain Carbon Steel Subjected to Tension, Compression or Torsion
  • ネツ ショリ シタ タンソ コウ ニ ヒッパリ , アッシュク アルイハ ネジリ オ オコナッタ トキ ノ ザンリュウ オウリョク ト ザンリュウヒズミ ニ ツイテ

この論文をさがす

抄録

The quenched and tempered steel, which has been subjected to a load below the yield stress, shows various residual strains after unloading, according to the condition of heat treatment. Especially, in the case it is tempered at 300°C, the residual strain appears in the opposite direction to the applied load. In this report, on the heat treated plain carbon steel subjected to tension, compression or torsion below yield stress, the dimensional change after unloading and the results of measurement of the residual stress in the specimens before loading and after unloading are explained. Also, the new method of measurement of the residual stress, which is suitable to apply to the heat treated cylinder with a small diameter, is explained.

収録刊行物

  • 日本機械学会誌

    日本機械学会誌 65 (525), 1502-, 1962

    一般社団法人 日本機械学会

詳細情報 詳細情報について

問題の指摘

ページトップへ