C07 蒸気駆動型熱音響エンジンの設計(パルス管冷凍機,熱音響機器及び関連要素と応用システム(2))

DOI Web Site Web Site

書誌事項

タイトル別名
  • C07 Design of Thermoacoustic Prime Mover Driven by Pressurized Steam
  • Design of Thermoacoustic Prime Mover Driven by Pressurized Steam

この論文をさがす

抄録

A looped tube type thermoacoustic prime mover with multiple regenerators driven by pressurized steam is being constructed. The pressurized steam is produced within a container filled by water which is boiled by an immersion electric heater. The steam is then let to flow t the hot heat exchangers of the thermoacoustic prime mover. The maximum pressure and temperature of the steam can be increased by adding extra water into the container when most of initial amount of water has changed to steam. The thermoacoustic prime mover with one to four regenerators will be tested. After laboratory test, we plan to realize a thermoacoustic prime mover driven by natural heat, by replacing the immersion electric heater with concentrated sunlight, and by utilizing steam from geothermal well.

収録刊行物

詳細情報 詳細情報について

問題の指摘

ページトップへ