ディトネータテストによる三軸AE計測系の校正

DOI Web Site Web Site

書誌事項

タイトル別名
  • Calibration of AE Measuring System by Detonator Test
  • ディトネータテストによる3軸AE計測系の校正
  • ディトネータ テスト ニ ヨル 3ジク AE ケイソクケイ ノ コウセイ

この論文をさがす

抄録

A simple technique to calibrate a downhole AE system to locate subsurface cracks is presented. Cross-hole detonation tests were employed for the calibration. In situ P-wave velocity in the formations is estimated from the P-wave arrival time. A simple formula associated with an appropriate filtering is proposed to equalize the difference of the frequency dependent coupling of tri-axial accelerometers set in a downhole AE sonde. Consideration ofthe ray path and the coupling compensation reduces the mapping error.<BR>Data measured at Higashi Hachimantai Field supports the validity of this technique. The accuracy achieved in the mapping of the AE source lies within 10 degrees in all directions.

収録刊行物

  • 日本鑛業會誌

    日本鑛業會誌 103 (1195), 537-542, 1987

    一般社団法人 資源・素材学会

詳細情報 詳細情報について

問題の指摘

ページトップへ