岩石のせん断強さ測定法に関する研究

DOI Web Site Web Site

書誌事項

タイトル別名
  • Study on Measurement of Shear Strength of Rocks
  • ガンセキ ノ センダン ツヨサ ソクテイホウ ニ カンスル ケンキュウ

この論文をさがす

抄録

The object of this study is to discuss how the shear strength of rocks, which is necessary for analytical, studies of rock fadure in drilling, blasting and in strata control, should be measured.<BR>It is considerecithat the methods for measuring the shear strength may be classified following two. Namely, (T) rhe shear strength (I) is measured by the nominal stress (P-A), where P is the shearing force and A is the areo of the shear plane, and (2) the shear strength (II) is measured by the calculation of the stresses actina or the plane of shear fracture.<BR>In this study, a double shear test was carried out for (I), and the Mohr's construction method, in which the shear strength would be found from intersection o fτ-axis and Mohr's envelope, was carried out for (II). The Mohr'senvelope is represented by the par Gbolic curve in this tast. And this Mohr'senvelope is guessed to be useful for measuring the shear strength in rock strata.<BR>The results are as follows; the shear strength (I) by double shear test is calculated larger than that (II) bv Mohr's envelope, because the normal stress acts on the shear plane in the former test.Also, in the double shear te: st under the tri-axial pressure, the regularity of the sheared surfaces increases as the confining pressure increcses.

収録刊行物

  • 日本鑛業會誌

    日本鑛業會誌 77 (881), 981-986, 1961

    一般社団法人 資源・素材学会

詳細情報 詳細情報について

問題の指摘

ページトップへ