304ステンレス鋼の応力腐食割れ破断寿命の確率分布に及ぼす鋭敏化処理の影響

DOI DOI Web Site Web Site Web Site ほか1件をすべて表示 一部だけ表示 オープンアクセス

書誌事項

タイトル別名
  • Effect of Sensitization on the Probability Distribution of Stress Corrosion Cracking Failure Times of Type 304 Stainless Steel
  • 304ステンレス鋼応力腐食割れ破断寿命の確率分布に及ぼす表面条件の影響
  • 304 ステンレス コウオウリョク フショク ワレ ハダン ジュミョウ ノ カ
  • 304 ステンレス コウ ノ オウリョク フショク ワレ ハダン ジュミョ
  • Effect of Surface Conditions on the Probability Distribution of Stress Corrosion Cracking Failure Times of Type 304 Stainless Steel

この論文をさがす

説明

Effect of sensitization heat treatment at 973K on the probability distribution of failure times of stress corrosion cracking of Type 304 stainless steel in boiling magnesium chloride solution at 399K, 411K and 427K and mainly at the stress of 100MPa has been examined. In all conditions examined, total failure time Tf is found to be divided into crack initiation time Ti and propagation time Tp, their distribution obeying a three parameter Weibull distribution with the high correlation coefficient of 0.941-0.996. Effect of sensitization heat treatment is observed only at 399K, at which Tp determines Tf. The shape parameter m of the distribution shows a maximum value for the highest sensitization heat teratment condition at 2.00×103s, at which intergranular cracking is observed in a part of fractured surface. From the comparison of fracture mode with the shape of the discribution, a mixed type distribution is also suggested to be fitted instead of a single three parameter Weibull distribution.

収録刊行物

キーワード

詳細情報 詳細情報について

問題の指摘

ページトップへ