書誌事項
- タイトル別名
-
- A basic study on correcting techniques for recovering the accuracy of a deteriorated lapping plate using a correcting carrier. 2nd report. Corrective characteristics owing to working pressure influence.
抄録
In the previous report, the characteristics of the frictional distance were analyzed assuming that wear amounts between a lapping plate and correcting carrier are proportional to both the relative frictional distance and the working pressure. However, the working pressure applied changes as time passes: therefore, the present paper treats it analytically with wear characteristics of lapping plate by means of the correcting carrier considering the working pressure change. Correcting machining of the deteriorated lapping plate is carried out on the basis of this result. It is confirmed that this method is capable of recovering the accuracy of the deteriorated lapping plate in a comparatively flat manner.
収録刊行物
-
- 日本機械学会論文集C編
-
日本機械学会論文集C編 56 (530), 2773-2778, 1990
一般社団法人 日本機械学会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206296857600
-
- NII論文ID
- 130004229068
-
- ISSN
- 18848354
- 03875024
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可