-
- Imaida Yutaka
- Faculty of Engineering, Doshisha University
-
- Takagawa Mitsuteru
- Faculty of Engineering, Doshisha University
-
- Kirimura Tsuyoshi
- Faculty of Engineering, Doshisha University
-
- Hirota Ken
- Faculty of Engineering, Doshisha University
-
- Yamaguchi Osamu
- Faculty of Engineering, Doshisha University
-
- Kakitsuji Atsushi
- Osaka Prefectural Institute of Industrial Technology
-
- Miyamoto Hiroki
- Osaka Prefectural Institute of Industrial Technology
Bibliographic Information
- Other Title
-
- Mechanical Properties of HIP Sintered B
Search this article
Abstract
Sendust metal ( Fe -9.56wt%Si -5.47wt%Al ) powders have been isostatically hot pressed and the mechanical properties of sintered bodies with various porosities examined at room temperature. Vickers hardness decreases linearly with increasing porosity. The porosity dependence of bending and compressive strengths is expressed by the equation σ=σ0exp(-np); σ0=540 MPa for the former and σ0=2800 MPa for the latter are determined, respectively, whereas the same value of n=0.22 is estimated from both strength-porosity data. Young's modulus is 300 GPa for sintered bodies with nearly theoretical density.
Journal
-
- Journal of the Japan Society of Powder and Powder Metallurgy
-
Journal of the Japan Society of Powder and Powder Metallurgy 40 (3), 359-362, 1993
Japan Society of Powder and Powder Metallurgy
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001206303996928
-
- NII Article ID
- 130000819224
-
- NII Book ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL BIB ID
- 3812479
-
- Text Lang
- en
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed