The development of self-lubricating sintered plates by powder rolling method. (2).
-
- Yamada Shinji
- オイレス工業(株)
-
- Sugafuji Akira
- オイレス工業(株)
-
- Matsuda Tetsuya
- オイレス工業(株)
-
- Shirasaka Yasuhiro
- オイレス工業(株)
-
- Atobe Toshiro
- オイレス工業(株)
Bibliographic Information
- Other Title
-
- 粉末圧延法による自己潤滑性焼結板の開発 第二報 圧延板と軟鋼との接合について
- フンマツ アツエンホウ ニ ヨル ジコ ジュンカツセイ ショウケツバン ノ カ
- 圧延板と軟鋼との接合について
Search this article
Abstract
In order to evaluate the joining between steels and the powder rolling sheets, the bonding conditions considering the role of the porosity, were investigated as functions of sintering temperature, sintering time and bonding pressure under the condition of dissociated ammonia gas atmosphere. Results obtained were as follows:<BR>(1) As a constant sintering time, the tensile strength of the joints increased at elevated bonding pressure. However, no particular change was recognized for the hardness of crystalline in the matrix phase.<BR>(2) The growth of crystallines and the increasing of pores between graphite and matrix phase were restrained with increasing the bonding pressure.<BR>(3) During tensile test, the specimens were broken outside the joint area in cases of sintering temperatures of 1150 K, 1200 K and 1250 K at the bonding pressure of 0.15 MPa. The increase of temperature and time during the sintering reduced porosities in the contact area, and in addition, the extension of diffusion layers were observed by EPMA.
Journal
-
- Journal of the Japan Society of Powder and Powder Metallurgy
-
Journal of the Japan Society of Powder and Powder Metallurgy 36 (8), 950-956, 1989
Japan Society of Powder and Powder Metallurgy
- Tweet
Keywords
Details 詳細情報について
-
- CRID
- 1390001206304421632
-
- NII Article ID
- 130000813748
-
- NII Book ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL BIB ID
- 3655868
-
- Text Lang
- ja
-
- Data Source
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- Abstract License Flag
- Disallowed