水アトマイズ法で作製した微量Zr添加合金粉末の焼結特性

書誌事項

タイトル別名
  • Effect of Addition of a Small Amount of Zr on the Sintering behavior of Water Atomized 316L Stainless Steel Powder
  • ミズ アトマイズホウ デ サクセイ シタ ビリョウ Zr テンカ ゴウキンフンマツ ノ ショウケツ トクセイ

この論文をさがす

説明

The main objective of the present work is to evaluate the effects of Zr addition on various properties of SUS316L stainless steel powders produced by water-atomization of liquid metals. The results are summarized as follows;<BR>1) The sintering density of SUS316L stainless steel powders pre-alloyed with 0.05 mass% of Zr was about 2 percent higher than that of the powder containing no Zr. However, in the powder pre-mixed with 0.05 mass% of Zr, no effect of Zr addition was observed.<BR>2) Mechanical properties were improved by pre-alloying with Zr, but impaired by pre-alloying with Zr.<BR>3) In pre-alloyed powder with 0.05 mass% of Zr, the increase of sintering density to start from 1073 K was observed. The micro-structural observation showed that the neck formation between particles started at 1073 K. The temperature is lower by about 100 K compared with the powder containing no Zr.

収録刊行物

被引用文献 (3)*注記

もっと見る

参考文献 (12)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ