書誌事項
- タイトル別名
-
- Effects of Finely Dispersed Sulfides on Microstructure and Impact Property of Ferrite-Pearlitic Steel.
- フェライト パーライト コウ ノ ソシキ ト ショウゲキ トクセイ ニ オヨボス リュウカブツ ビサイ ブンサン ノ エイキョウ
この論文をさがす
説明
For the purpose of improving the impact properties of ferrite-pearlitic microalloyed steels through the refinement of structure, the steels with finely dispersed sulfides were produced by P/M process. In these steels, average manganese sulfide size was one-tenth of that in conventional steels (I/M steels) and the number of inclusions was increased about two digits. The ferrite-pearlite grain size was decreased by these inclusions. Although the impact values of the steels were increased by refinement of ferrite-pearlitic structure, they were decreased by the increase of the number of inclusions. Consequently, the impact value of the steels were not improved in comparison with conventional steels.<BR>Therefore, it is necessary to decrease the number of sulfides by controlling the sulfides slightly larger than those in the P/M steels. In this case, it is expected that the ferrite-pearlite grain size will become finer by the increase of intragranular ferrite in spite of increasing the prior austenite grain size.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 49 (3), 172-177, 2002
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206308339072
-
- NII論文ID
- 10008007522
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 6126315
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可