書誌事項
- タイトル別名
-
- Development of High Precision and Strength Sintered Ferrous Alloy Gear by Rolling -3rd Report- Improvement of Tooth Root Bending Fatigue Strength of Sintered Ferrous Alloy Gear by Modified Tool
- 鉄系焼結合金歯車の転造による高精度化・高強度化(第3報)修整歯形工具による鉄系焼結合金歯車の歯元曲げ疲労強度向上
- テツケイ ショウケツ ゴウキン ハグルマ ノ テンゾウ ニ ヨル コウセイドカ コウキョウドカ ダイ3ポウ シュウセイ ハガタ コウグ ニ ヨル テツケイ ショウケツ ゴウキン ハグルマ ノ ハモト マゲ ヒロウ キョウド コウジョウ
- Development of High Precision and Strength Sintered Ferrous Alloy Gear by Rolling -3rd Report-
- Improvement of Tooth Root Bending Fatigue Strength of Sintered Ferrous Alloy Gear by Modified Tool
- 修整歯形工具による鉄系焼結合金歯車の歯元曲げ疲労強度向上
この論文をさがす
抄録
Surface finish rolling experiments were carried out using P/M spur gears of 0.6Mo-0.2Mn pre-alloyed sintered steel and of 0.8Mo-0.2Mn partially alloyed sintered steel with the density of 7.10 Mg/m3. A CNC form rolling machine of axis intersection type was employed, and a modified screw-shaped rolling tool was prepared: the modified concave tooth profile optimized by numerical tooth profile analysis for simultaneous rolling of tooth and fillet surface. Then, porosity distributions in the surface layer of rolled gear teeth were determined and the effects of the amount of tool radial feed R0 on the selective surface densification behaviors were evaluated. Besides, single tooth bending fatigue test was conducted. Gears with good tooth profiles were obtained by using the modified tools. As a result, the porosities in both the tooth flank and the fillet at the root were reduced to the target level at R0=600 μm in simultaneous rolling process. Furthermore, the single tooth bending fatigue durability was much improved to about 60 % of the case hardened wrought steel gears of SCM415.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 57 (6), 435-441, 2010
一般社団法人 粉体粉末冶金協会
- Tweet
詳細情報 詳細情報について
-
- CRID
- 1390001206308570240
-
- NII論文ID
- 10026441654
-
- NII書誌ID
- AN00222724
-
- COI
- 1:CAS:528:DC%2BC3cXos12gs7Y%3D
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 10755225
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可