書誌事項
- タイトル別名
-
- The Effect of Al Addition on Microstructure and Mechanical Properties of TiC-15Ni-8Mo Cermet
- TiC 15Ni 8Mo サーメット エ ノ アルミニウム テンカ ノ ビサイ
この論文をさがす
抄録
For the purpose of strengthening the binder phase of TiC base cermets, we investigated the effect of 0.5-2% Al addition on mechanical and cutting properties.<BR>The results obtained are as follows;<BR>1) The hardness of sintered compacts increased almost linearly with Al content.<BR>2) By means of X-ray diffraction, it was recognized that the binder phase of the alloys containing 0.5% and 1.0% Al consists of both y and γ' phases. On the other hand, in the case of 2% Al addition, the microstructure consists of only γ' phases<BR>3) It was shown that transverse-rupture strength of the alloys drops with increase of Al content. 4) The alloy containing 1% Al showed the most excellent wear resistance in continuous steel cutting test; the result can be explained in terms of the effect of γ' precipitation hardening. While the alloy containing 2% Al showed somewhat lower wear resistance presumably because of the effect of the negative temperature dependence of the strength of γ'.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 26 (5), 169-173, 1979
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206308840192
-
- NII論文ID
- 130000821756
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 2058867
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可