金属粉の製造および評価試験 酸化物分散強化Ni粉の焼結

書誌事項

タイトル別名
  • Sintering of ODS-Ni Powder.
  • サンカブツ ブンサン キョウカ Ni フン ノ ショウケツ

この論文をさがす

抄録

New sintering procedure of ODS-Ni powder which has very poor sinterability in an inert or a reductive atmosphere has been studied employing Ni-ZrO2 powder. It was found that sintering of Ni-ZrO2 powder was extremely accelerated by undergoing pre-sintering treatment in an atmosphere of air prior to ordinary sintering in a reductive atmosphere. In presintering process, caused by the mass-transfer of Ni to the surface of Nickel oxide layer from the matrix, NiO layer free from ZrO2 particles formed on the outside of the original matrix surface, and the presence of this NiO layer free from ZrO2 particles contributed to acceleration of sintering in subsequent ordinary sintering process. But if the pre-sintering temperature exceeded 1273K, the bending strength of the sintered body was lowered caused by coarsening and aggregating of ZrO2 particles.

収録刊行物

被引用文献 (1)*注記

もっと見る

参考文献 (11)*注記

もっと見る

詳細情報 詳細情報について

問題の指摘

ページトップへ