書誌事項
- タイトル別名
-
- Bend-Deformation Characteristics of TiC-Base Cermet at Elevated Temperatures
- TiCキ サーメット ノ コウオン マゲ ヘンケイ キョドウ
この論文をさがす
抄録
The deformation behavior of TiC-Mo2C-Ni cermet affected by the additional TiN was mainly studied at 873-1273 K by means of three-point bend tests. It was found that the high temperature deformation of the cermet was highly suppressed by the addition of TiN with increasing test temperature, and that the creep rupture strength of the TiN-contained cermet became superior to that of usual WC-base alloys, in particular, at 1273 K and under low stresses. These results obtained in the TiN-contained cermet were considered to be due to the restraint of the dynamic recovery of binder phase during deformation.
収録刊行物
-
- 粉体および粉末冶金
-
粉体および粉末冶金 27 (8), 266-270, 1980
一般社団法人 粉体粉末冶金協会
- Tweet
キーワード
詳細情報 詳細情報について
-
- CRID
- 1390001206308895744
-
- NII論文ID
- 130000812334
-
- NII書誌ID
- AN00222724
-
- ISSN
- 18809014
- 05328799
-
- NDL書誌ID
- 2199022
-
- 本文言語コード
- ja
-
- データソース種別
-
- JaLC
- NDL
- Crossref
- CiNii Articles
-
- 抄録ライセンスフラグ
- 使用不可